Oki 182 - Line Feed; Paper out

-
ML182/183----------------------------------
-
LINE FEED
"",'
ASCII
LF
Decimal
10
i
Hexadecimal
OA
VT
11
OB
Execution of the VT or LF command causes one line of data to be
printed, and also causes the paper to advance one line.
PAPER OUT
-
ASCII
ESC 8
CHR$(27);CHR$(56);
1 B 38
-
ESC 9
CHR$(27);CHR$(57);
1 B 39
If you want to disable the paper out alarm (the paper indicator will
not light when paper is low) enter the ESC 8 command. If you want
to
be signaled by the printer when paper is low or out, (this is the
default setting)
use the ESC 8 command.
NEAR
LETTER QUALITY MODE
ASCII
-
ESC I ETX
(27) (73) (3)
(1 B) (49) (03)
When you want to make a good impression with a memorandum or
letter, use OKl's special near letter quality mode. In this mode the
printer prints over each line twice. On the second pass, the printer
fills in the dot pattern to form a sharp, crisp letter. You get great
results
when you print your word-processing files in this mode.
-
UTILITY
MODE
ASCII
ESC I SOH
Decimal
(27) (73) (1)
Hexadecimal
(1 B) (49) (01)
-
The first time you turn your printer on, it will automatically print in
utility mode. In this
mode, the printer prints bidirectionally. This
printing method increases the printer's speed, so it prints 120
characters per second.
-
-
76