ML182/183---------------------------------
receive data from the printer). The indicator
is
out when the printer
is
de~elected
and
duri ng self test.
TOF
Switch:
To
set
the first line position on each page
(top
of
form), deselect the printer and
press
this switch when the print head
is
at the
desired position. You can also select
17.1-character-per-inch printing
with
this
switch by
holding
it
down
when turning
printer
power
ON.
FORM
FEED
Switch:
To advance
the
paper
to
the
next page
(top
of
form),
press this switch
while
the
printer
is
deselected. You can also select
NLQ
(near
letter
quality,
page
76)
with
this
button.
Just
hold
down
the
FORM
FEED
button
while
you're
switching
on
the
printer.
ALARM Indicator:
Lights when paper supply
is
low
or ex-
-
hausted (unless you
use
the command to
disable the alarm, described on page 75).
Printing stops until the paper
~upply
is
replenished.
LINE
FEED
Switch:
If
you want to advance the paper one line,
press
this switch
while
the printer
is
deselected. It
is
also used to perform a self
test: turn
ON
the printer power
while
holding
down
this pushbutton.
The lever on the printer allows you to adjust the paper.
PAPER
LOCK/RELEASE
LEVER:
Open (slide forward) for inserting paper, for
adjusting paper, and when using tractor feed
computer paper. Close (slide back) for roll
paper and for single sheets.
PAPER
GAP ADJUSTMENT:
Slide toward the
print
head when inserting
single sheets, and away when using
-
multipart paper.
22
To Next Page
Loading...
