Oki 182 - Page 38

ML182/183 ___ _
4. Pull the ball arm lever forward to move the column indicator
away
from the platen.
5. Place the paper release lever in the forward (open) position.
6. Insert the paper shaft in the roll paper core, and open the
sheet
guide of the roll paper stand. Mount the shaft on the
stands
so the grooved end of the shaft fits into the groove on
the left stand, and the paper rolls from the bottom.
-
-
-
7. Insert the paper from the back of the platen, making sure its
edges lie
within the platen ends. (The sprocket pins would
tear it!)
8. Push the paper in slightly. Now turn the platen knob to bring -
the paper to the front of the platen.
28