ML182/183--
__________________________
__
6.
Adjust the left tractor
if
necessary; be sure it
is
no more than
12.7
mm
(1/2 inch) to the right
of
the left end. To move the
tractor, pull the lock lever open, slide the tractor to the desired
position, then push
it
to lock
it
in place.
7.
8.
Pull the paper under the
column
indicator and
up
to the level
of
the tractor unit.
Adjust the right tractor to the paper
width
by pulling the lock
lever open, sliding the tractor to the right
or
left (depending on
the paper size), and pushing the lock lever to lock
it
in place.
-
32
To Next Page
Loading...
