Oki 6300FB - Page 39

Operating instructions > 39
ITEM FUNCTION SETTING
Cut Position Adjust Select an adjustment value
for the position to cut the
end of a continuous form.
(In 1/90 in increments)
-7 ~ -1
0
+7 ~ +1
Registration Low Adjust the print starting
position on printing in the
reverse direction.
(The position moves to
the right or left in 1/720 in
increments.)
-10 ~ -1
0
+10 ~ +1
Registration Normal Adjust the print starting
position on printing in the
reverse direction.
(The position moves to
the right or left in 1/720 in
increments.)
-10 ~ -1
0
+10 ~ +1
Registration High1 Adjust the print starting
position on printing in the
reverse direction.
(The position moves to
the right or left in 1/720 in
increments.)
-10 ~ -1
0
+10 ~ +1
Registration High2 Adjust the print starting
position on printing in the
reverse direction.
(The position moves to
the right or left in 1/720 in
increments.)
-10 ~ -1
0
+10 ~ +1
LF Revise (Cut
Sheet)
Adjust a line feed amount in
cut-paper mode.
-14 ~ -1
0
+14 ~ +1