Oki 6300FB - Page 53

Troubleshooting > 53
PROBLEM CAUSE ACTION
Several blank lines
appear in the printout.
Skip over perforation
spacing is selected.
Cancel the skip over
perforation spacing.
The selected skip over
perforation spacing
does not match the
physical tear-off
perforation positions.
The paper length selected
in the application does
not match the physical
paper length.
Match the paper length
selected in the application
with the physical paper
length in use.
Select the paper length
in number of lines in the
application.
Abnormal switchover between cut sheet and continuous forms modes.
No cut sheet feed. The printer is in
continuous forms mode.
Set the Paper Type lever
to cut sheet mode.
No continuous forms
feed.
The printer is in cut sheet
mode.
Set the Paper Type lever
to continuous forms
mode.
Paper feed operations
for both cut sheets and
continuous forms are
actuated.
The cut sheet is not
ejected.
Eject the cut sheet.