Why is my Oki B4100 producing distorted prints?
If your Oki Printer is experiencing a distorted print, it could be due to a problem with the paper path, lamp assembly, or fusing unit. Try generating a cleaning page. If the problem persists, contact service.
Why is my Oki B4100 Printer printing garbled text?
If your Oki Printer is printing garbled output, it's likely that the incorrect driver is installed. Try installing an appropriate driver for your printer model.
Why are the pages from my Oki B4100 Printer curling excessively?
If your Oki Printer is producing pages that curl excessively, it could be due to several reasons. You might be printing on the wrong side of the paper, so turn the paper over in the tray, placing it print side down. Moisture in the paper or improper storage can also cause curling, so avoid storing paper in areas of excessive temperature and humidity, and keep it in protective wrapping. High humidity can also cause this issue; the recommended operating humidity is between 20-80%.
Why are bold characters and dark lines smeared on my Oki Printer?
If the bold characters and dark lines are smeared on your Oki Printer, it's likely that the toner is low. Try installing a new toner cartridge to resolve this issue.
How to fix fuzzy print on my Oki B4100 Printer?
If you're getting fuzzy print from your Oki Printer, the LED array might be dirty. Try cleaning the LED array to resolve this issue.
Why does my Oki Printer have an oblong area of faint print on each page?
If you notice an oblong area of faint print appearing on each page from your Oki Printer, it's likely caused by using paper exposed to high humidity. To resolve this, change paper stocks, check the paper storage environment, or use a dehumidifier. You should also check the toner level.
Why is my Oki B4100 so slow?
If your Oki Printer's output is below its rated speed, it could be due to your application. Text documents may print slowly depending on the selected fonts and how they are transferred to the printer. For maximum speed, use text in your document and use a printer resident font.
What to do if my Oki Printer prints pages with a grey background?
If your Oki Printer is printing pages with a grey background, it's likely due to static electricity. This often happens in dry environments, causing toner to stick to the background. To fix this, try changing the paper to a smoother laser bond or use a humidifier to increase the humidity in the room.
What to do if Oki B4100 does not print but indicates it is ready?
If you try to print and nothing happens, but the Oki Printer indicates it is ready to receive data, check the cable connection. If more than one printer is available, make sure your printer has been selected.
Why is printed page light or blurred on my Oki B4100?
If the printed page from your Oki Printer is light or blurred, first, replace the toner cartridge. Then, ensure you are using paper recommended for laser printers. Finally, clean the LED array.
Performance| print speed | 19 pages per minute |
|---|---|
| CPU | 200 MHz |
| time to first page | 6.0 seconds |
| print resolution | 1200 x 600 dpi |
| duty cycle | 15, 000 pages per month |
Memory| standard RAM | 8 MB |
|---|---|
| maximum RAM | 8 MB |
Paper Handling| standard paper input | 250-sheet Letter/Legal/Universal tray |
|---|---|
| paper size minimum | 3.4" x 5.5" |
| paper size maximum | 8.5" x 14" |
Weight and Dimensions| size (WxDxH) | 14" x 15.6" x 7.9" |
|---|---|
| size (WxDxH in cm) | 35.5 cm x 39.5 cm x 20 cm |
| weight | 22 lb. (10.0 kg) |
Describes the meaning of notes, cautions, and warnings for user safety and equipment protection.
Describes the operator panel, LEDs, and control button for B4100/B4250 models.
Explains the primary and secondary functions of the control button.
Details the purpose and usage of the printer's Status Monitor software.
Guide to accessing and configuring printer settings via the Printer Setup tab.
Describes the control panel, display, and buttons for B4350/B4350n models.
Guidelines for selecting suitable paper and envelopes for the printer.
Step-by-step instructions for loading paper into the printer.
How to adjust printer settings for different media types.
Describes the printer's data interface options.
Guide to installing printer drivers on Windows systems.
Steps to install the printer status monitoring software.
Guide to installing drivers on Mac OS 9.1.
Guide to installing drivers on Mac OS X.1.
Instructions on when and how to replace the toner cartridge.
Instructions on when and how to replace the image drum.
Understanding printer status and error feedback for diagnostics.
Explains the types of paper jams and their locations.
Detailed steps to clear input, feed, and exit jams from the printer.
Troubleshooting common issues affecting print quality.
Troubleshooting issues related to software, applications, and drivers.
Troubleshooting issues related to the printer's hardware components.
To Next Page
