Why is the print from my Oki B4100 light or blurred?
If the printed page from your Oki Printer appears light or blurred, it could be due to several reasons. First, check if the toner is low and replace the toner cartridge if needed. Ensure that you are using paper meant for laser printers. Also, a dirty LED array can cause this issue, so try cleaning it.
Why is my Oki Printer producing smeared or blotched prints?
If your Oki Printer is printing smeared or blotched output, it could be due to dirty rollers, toner dropped inside the printer, or an image drum problem. Try replacing the image drum and toner.
What to do if my Oki B4100 shows FEED JAM OR EXIT JAM?
To fix a FEED JAM or EXIT JAM on your Oki Printer, remove the tray and clear any misfed sheets. Open the top cover, being mindful that the fuser area will be hot and is clearly marked. Carefully lift out the image drum (with the toner cartridge) and remove any jammed sheets from the paper path. Re-install the image drum with the toner cartridge, close the top cover, and press down to latch it. The printer will warm up and reprint the lost page. If the edge of the jammed paper protrudes from the exit, reinstall the image drum, close the top cover and switch the printer on. Remove the jammed paper from the exit when the exit roller begins rotating after a few seconds after switching on. However, if the jammed paper cannot be removed, contact a service representative.
Why is printed page light or blurred on my Oki B4100?
If the printed page from your Oki Printer is light or blurred, first, replace the toner cartridge. Then, ensure you are using paper recommended for laser printers. Finally, clean the LED array.
What to do if Oki B4100 does not print but indicates it is ready?
If you try to print and nothing happens, but the Oki Printer indicates it is ready to receive data, check the cable connection. If more than one printer is available, make sure your printer has been selected.
What to do if my Oki Printer prints pages with a grey background?
If your Oki Printer is printing pages with a grey background, it's likely due to static electricity. This often happens in dry environments, causing toner to stick to the background. To fix this, try changing the paper to a smoother laser bond or use a humidifier to increase the humidity in the room.
How to fix a FEED JAM or EXIT JAM error on an Oki Printer?
If your Oki Printer is experiencing paper jams with a 'FEED JAM OR EXIT JAM' error, follow these steps: First, remove the tray and clear any misfed sheets. Then, open the top cover and carefully lift out the image drum, complete with the toner cartridge. Remove any jammed sheets from the paper path. Re-install the image drum complete with toner cartridge, ensuring that it correctly locates into the slots on each side of the printer. Close the top cover and press down to latch it closed. The printer will warm up and start printing; the lost page will be reprinted.
Why does my Oki Printer have an oblong area of faint print on each page?
If you notice an oblong area of faint print appearing on each page from your Oki Printer, it's likely caused by using paper exposed to high humidity. To resolve this, change paper stocks, check the paper storage environment, or use a dehumidifier. You should also check the toner level.
How to fix fuzzy print on my Oki B4100 Printer?
If you're getting fuzzy print from your Oki Printer, the LED array might be dirty. Try cleaning the LED array to resolve this issue.
Why are bold characters and dark lines smeared on my Oki Printer?
If the bold characters and dark lines are smeared on your Oki Printer, it's likely that the toner is low. Try installing a new toner cartridge to resolve this issue.
Describes the meaning of notes, cautions, and warnings for user safety and equipment protection.
Describes the operator panel, LEDs, and control button for B4100/B4250 models.
Explains the primary and secondary functions of the control button.
Details the purpose and usage of the printer's Status Monitor software.
Guide to accessing and configuring printer settings via the Printer Setup tab.
Describes the control panel, display, and buttons for B4350/B4350n models.
Guidelines for selecting suitable paper and envelopes for the printer.
Step-by-step instructions for loading paper into the printer.
How to adjust printer settings for different media types.
Describes the printer's data interface options.
Guide to installing printer drivers on Windows systems.
Steps to install the printer status monitoring software.
Guide to installing drivers on Mac OS 9.1.
Guide to installing drivers on Mac OS X.1.
Instructions on when and how to replace the toner cartridge.
Instructions on when and how to replace the image drum.
Understanding printer status and error feedback for diagnostics.
Explains the types of paper jams and their locations.
Detailed steps to clear input, feed, and exit jams from the printer.
Troubleshooting common issues affecting print quality.
Troubleshooting issues related to software, applications, and drivers.
Troubleshooting issues related to the printer's hardware components.
Performance| print speed | 19 pages per minute |
|---|---|
| CPU | 200 MHz |
| time to first page | 6.0 seconds |
| print resolution | 1200 x 600 dpi |
| duty cycle | 15, 000 pages per month |
Memory| standard RAM | 8 MB |
|---|---|
| maximum RAM | 8 MB |
Paper Handling| standard paper input | 250-sheet Letter/Legal/Universal tray |
|---|---|
| paper size minimum | 3.4" x 5.5" |
| paper size maximum | 8.5" x 14" |
Weight and Dimensions| size (WxDxH) | 14" x 15.6" x 7.9" |
|---|---|
| size (WxDxH in cm) | 35.5 cm x 39.5 cm x 20 cm |
| weight | 22 lb. (10.0 kg) |
To Next Page
