Oki B4200 User Manual

IV - 24
Section 4 - Chapter 4 - OkiNet for TCP/IP
OKI OkiLAN 6020e User’s Guide
Running OkiNet for TCP/IP
To run the utility, double-click on the OkiNet icon. The
main OkiNet for TCP/IP screen will display.
By default, the All Print Servers view is selected and all
print servers attached to the subnet of the network from
which the OkiNet utility is running are listed.
Configuring the OkiLAN 6020e Using
OkiNet for TCP/IP
The following steps outline how to configure an
OkiLAN 6020e. To change settings of a previously
configured OkiLAN 6020e, follow the same procedure
but skip Step 3, as no prompt will appear.
1. Select the OkiLAN 6020e you wish to configure.
2. Select Configuration from the Print Server menu or
select the Configuration icon on the toolbar.
3. When prompted, enter the IP Address of the
OkiLAN 6020e.
4. Set the appropriate configuration by choosing the
applicable file folder tabs.
The following settings are configurable:
• TCP/IP • EtherTalk
• NetWare • Output Port
• NetWare Port • SNMP
• NetWare Queues • Protocols
• VINES* • SNMP Traps
* May apply to other OkiLAN print server models.

Oki B4200 Specifications

General

Brand	Oki
Model	B4200
Category	Printer
Language	English