OkiLAN 8100e Network User’s Guide
Microsoft Windows - 104
Windows 95/98/Me
1. Click [Start] → [Settings] → [Control Panel].
2. In the Control Panel double-click on the [Network] icon.
3. In the Network dialogue box select [Configuration Panel].
4. If [Client for Microsoft Networks] is not listed, click [Add].
5. In the [Select Network Component Type] dialogue box,
select [Protocol] then [Add].
6. In the [Select Network Protocol] dialogue box, select
[Microsoft] from the list of manufacturers, then select
[NetBEUI] from the list of [Network Protocols] and then click
[OK].
7. The Windows installation CD-ROM may be required. Follow
the remaining dialogue box prompts.
Windows NT 4.0
1. Click the [Start] button, select [Settings] and then [Control
Panel].
2. Double-click the [Network] icon.
3. In the [Network] dialogue box, click the [Protocols] tab.
4. If the [NetBEUI Protocol] is not listed, click [Add].
5. In the [Select Network Protocol] dialogue box, select
[NetBEUI Protocol] and click [OK].
To Next Page
Loading...
Need help?
General
