OkiLAN 8100e Network User’s Guide
Configuration - 23
Standard Setup Using AdminManager
AdminManager is a powerful Microsoft Windows-based utility to
configure all print server functions by using a graphical user
interface.
Configuration requires a PC with Windows 95/98/Me, Windows
2000 Advanced Server/Professional or Windows NT Server 4.0/
Work-station 4.0, Windows XP running TCP/IP or IPX/SPX
(NetWare).
This utility can only be used on a PC that can be connected to the
network with TCP/IP or IPX/ SPX and must be used on a PC that is
located in the same segment as the printer.
To create a NetWare queue, NetWare Client 32 or IntranetWare
Client should be installed on to your system.
The following explanation uses Windows 98 as an example.
To Next Page
Loading...
Need help?
General
