Oki C 3200n Network User's Guide

OkiLAN 8100e Network User’s Guide
Configuration - 13
Configuration Utility
Available utilities
You can configure the print server by using one of the following
methods:
Utility Features System requirements
Quick Setup Configure the print server
easily and simply without
installing any software
packages into your system.
You can set the following:
Enable/disable TCP/IP,
NetWare, EtherTalk, NetBEUI
protocols.
> Set IP address, Subnet Mask
and Gateway for TCP/IP
manually or by using DHCP.
> Set NetWare Mode and create
Queue/Print Server/Printer
objects.
> Zone name and Port name for
EtherTalk.
Windows95/98/Me/NT4.0/
2000/XP (TCP/IP protocol or
IPX/SPX protocol should be
installed).
To create a NetWare queue,
NetWare Client 32 or
IntranetWare Client should
be installed in your system.
Web browser Configure the print server and
printer by using a Web
browser such as Microsoft
Internet browser or Netscape
Navigator.
Microsoft Internet Explorer
Version 3.0 and higher or
Netscape Navigator Version
3.0 and higher. Operating
system that supports Web
browser.
AdminManager Configure the print server in
detail.
Windows95/98/Me/NT4.0/
2000/XP (TCP/IP protocol or
IPX/SPX protocol should be
installed). to create a
NetWare queue, NetWare
Client 32 or IntranetWare
Client should be installed in
your system.
TELNET Configure the print server
using TELNET.
Third-party vendor developed
TELNET client package.
A TELNET Application is
standard in Windows/UNIX/
Linux.

Oki C 3200n Specifications

General

Brand	Oki
Model	C 3200n
Category	Printer
Language	English