OkiLAN 8100e Network User’s Guide
Microsoft Windows - 94
Now that both Windows and the printer have been configured to
use TCP/IP, the next step is to configure Windows to print to the
network printer.
Windows 95/98/Me
When printing using TCP/IP, the Oki LPR utility is the only option to
use. The following procedure should be used.
When installing the driver, ensure it is installed as a local printer
and not a network printer. Ensure the appropriate printer driver
has been installed in Windows.
Install the Oki LPR utility as described on page 84 of this manual
and add the printer installed earlier.
Windows NT 4.0
With Windows NT 4.0, you have two options for printing using TCP/
IP. They are:
>Oki LPR
>Microsoft LPR
In order to use Microsoft LPR, it must first be installed into your
operating system.
NT 4.0 requires administrator privileges.
Oki LPR
Please follow the procedure described in the Windows 95/98/Me
section on page 94.
Microsoft LPR
To install this port, the following needs to be carried out.
1. Select [Start], [Settings], [Control Panel] and then select
[Printers].
To Next Page
Loading...
Need help?
General
