OkiLAN 8100e Network User’s Guide
Configuration - 33
TCP/IP Tab
This allows you to configure TCP/IP related items.
bmp22.bmp
To find corresponding items in WEB and TELNET, see the
equivalent in the Configurable Items and Default Values table that
starts on page 62.
Location Comments
Use TCP/IP
Protocol
Set TCP/IP protocol as enabled/disabled.
Use DHCP/BOOTP Check this item if IP address, subnet mask, default
gateway and IP addresses for DNS primary server and
secondary servers are retrieved from the DHCP or
BOOTP server. Otherwise, clear.
Use RARP Check this item if IP address is retrieved from the
RARP server. Otherwise, clear.
IP Address Set the IP address of the selected network interface
card.
Subnet Mask Set the subnet mask of the selected network interface
card.
Default Gateway Set the default gateway of the selected network
interface card.
Use FTP/LPD
Banner
Check this item if you want to add the FTP/LPD banner.
Otherwise, clear.
DNS Server . . . Set IP addresses for DNS primary and secondary
servers.
bmp23.bmp
To Next Page
Loading...
Need help?
General
