OkiLAN 8100e Network User’s Guide
Configuration - 53
DHCP/RARP server), or with the network. Reset the network
interface card settings to default and try to set temporary IP
address. If you still have the problem after resetting the network
interface card, consult the network manager.
4. Login to the network card using TELNET.
Example: for IP address 172.168.20.127
$ telnet 172.168.20.127
Trying 172.168.20.127
Connected to 172.168.20.127
Escape character is ‘^]’.
EthernetBoard OkiLAN PRINTER".
login: root
‘root’ user needs password to login.
password:
User ‘root’ logged in.
No. Message Value (level.1)
------------------------------------
1: Setup TCP/IP
2: Setup SNMP
3: Setup NetWare
4: Setup EtherTalk
5: Setup NetBEUI
6: Setup printer port
7: Display Status
To Next Page
Loading...
Need help?
General
