Oki C 3200n Network User's Guide

OkiLAN 8100e Network User’s Guide
Configuration - 63
TCPIP-8 [OKI Device
Setup]
-[TCP/IP]-
[DNS
Server...]
-[Secondary
Server]
[Network
Configuration]-[T
CP/IP]-[Fixed IP
Address
Settings]-[DNS
Server Address
(Sec.)]
[Setup TCP/
IP]-[DNS
server(Sec.)]
0.0.0.0—
255.255.255.25
5 (0.0.0.0)
Set IP
address for
secondary
DNS server
TCPIP-9 [OKI Device
Setup]-[Gen
eral]-[Chan
ge root
password]
[Setup TCP/
IP]-
[root
password]
Any
alphanumeric
characters up
to seven
characters.
(Default is null)
Set the root
password of
OkiLAN
SNMP-1 [OKI Device
Setup]-[SN
MP]-[Authe
ntic
Community]
[Network
Configuration]-[
SNMP Traps]-
[MIB-II
Information]-[Au
thentic
Community]
[Setup
SNMP]-[Authe
ntic
community]
Any
alphanumeric
characters up to
15 characters.
(Default is
[public])
This
community
name is
used to
check
whether
incoming
SNMP
requests
have the
correct
community
name or
not. The
community
name is
displayed
as ******
for security
reasons
SNMP-2 [OKI Device
Setup]-[SN
MP]-[TRAP
Community]
[Network
Configuration]-[
SNMP Traps]-
[MIB-II
Information]-
[Trap
Community]
[Setup SNMP]-
[Trap
community]
Any
alphanumeric
characters up to
15 characters.
(Default is
[public])
This
community
name is
assigned to
outgoing
system
traps such
as cold
start,
authenti-ca
tion failure,
etc.
SNMP-3 [OKI Device
Setup]-[SN
MP]-
[TRAP
Address]
[Network
Configuration]-[
SNMP Traps]-
[MIB-II
Information]-
[Trap IP Address]
[Setup SNMP]-
[Trap address]
0.0.0.0—
255.255.255.25
5 (0.0.0.0)
Set a
destination
IP address
of Trap
packet. If
0.0.0.0 is
set, Trap is
disabled
Ref. No. Admin
Manager
Web browser TELNET/
Diagnostic
test print
Available
options
Notes

Oki C 3200n Specifications

General

Brand	Oki
Model	C 3200n
Category	Printer
Language	English