Oki C 9650n Network And Configuration Guide

Using adminmanager standard setup > 28
Netware Tab (Oki Device Setup)
ITEM COMMENTS
Use NetWare Protocol Enable/disable NetWare protocol.
Use IPX Protocol Click to deselect if you do not wish to use IPX.
Use TCP/IP Protocol Click this to select TCP/IP protocol.
Print Server Name Set a Print Server name.
Frame Type Set the primary NetWare frame type.
Operation Mode Select the NetWare mode:
PSERVER Mode (the default)
RPRINTER Mode
Bindery Setup check box. Click to deselect Bindery. When Bindery Setup
is deselected, the Bindery Setup… button is
greyed out.
Bindery Setup Configure Bindery mode items, including:
File Server to be
connected.
Specify up to 8 file
servers to connect.
Password. Set a password for
the Print Server.
Job Polling Time Set the print job
polling interval in
seconds.
NDS Setup Set the NDS Tree and Context where the Print
Server was created.

Oki C 9650n Specifications

General

Brand	Oki
Model	C 9650n
Category	Printer
Language	English