Using adminmanager standard setup > 32
Printer Trap
Setup…
The following items can be configured:
Printer Trap
Community
Name
This community name is assigned to
outgoing printer status traps such as
off-line, paper out, etc.
TCP #1 through
TCP #5
Set up to five IP addresses to which a
Trap packet will be sent.
Detail…
[for TCP #1
through TCP #5]
Click to enable sending a Trap packet for
any or all of the following selectable
conditions:
Printer Reboot
Receive Illegal
Online
Offline
Paper Out
Paper Jam
Cover Open
Printer Error
IPX Set node address and network address
to which a Trap packet will be sent.
Detail… [for IPX] Click to enable sending a Trap packet for
any or all of the following selectable
conditions:
Online
Offline
Paper Out
Paper Jam
Cover Open
Printer Error
ITEM COMMENTS