Output Tray4-16
Output Tray
All media is fed out facing down into the output tray on top of the printer. This
tray has a capacity of approximately 100 sheets (A4/Letter) of 80 g/m
2
(21 lb)
paper.
" If the media is stacked too high in the output tray, your printer may
experience media misfeeds, excessive media curl, or static buildup.
Media Storage
Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time out of its packaging may dry up
too much and cause misfeeding.
If media has been removed from its wrapper, place it in its original pack-
aging and store in a cool, dark place on a level surface.
Avoid moisture, excessive humidity, direct sunlight, excessive heat (above
35°C [95°F]), and dust.
Avoid leaning against other objects or placing it in an upright position.
Before using stored media, do a trial printing and check print quality.
To Next Page
Loading...
