Solving Problems with Media Misfeeds 7-19
Media is
misfeeding.
Envelopes are facing
the wrong way in
Tray 1.
Load the envelopes in Tray 1 so the
flaps are facing down.
If the flaps are on the long edge
(Envelope C6 and Envelope DL), load
the envelopes with the flap edge
toward the machine and the flap side
facing down.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
See “Print Media” on page 4-2
The media feed roller
is dirty.
Clean the media feed roller.
For more details, refer to “Interior” on
page 6-5.
Symptom Cause Solution
To Next Page
Loading...
