Network configuration > 26
U
SING
A
WEB
BROWSER
If the printer is connected to the network using TCP/IP, its settings and the printer menu
settings can be configured using a Web browser. Refer to the relevant manuals for details
of how to launch and use the browser.
M
ICROSOFT
INTERNET
EXPLORER
1. Select Internet Options in the Tools menu.
2. Click on the General tab and click Settings in Temporary Internet files.
3. Select Every visit to the page in Check for newer versions of stored pages.
D
EFAULT
USER
NAME
AND
PASSWORD
To apply configuration changes using a Web browser, you will be prompted for a username
and password. The username is admin and the default password is aaaaaa.
The admin password can be changed to allow you to configure the printer by using a Web
browser/TELNET/AdminManager. To change the password, select Password
Configuration in the Maintenance tab and follow the on-screen instructions.
A
DJUSTING
PRINTER
SETTINGS
The network addresses used in this manual are shown as examples only. Network
addresses used in your installation must be generated from your own network.
1. Configure the IP Address, Subnet Mask and Gateway for the network card. Launch
the Web browser, enter the IP Address of the network interface card in Address
(Location/Position) and press the Enter key.
2. Select a tab and items to be changed in the left frame. You need to log in as admin
to be able to configure all items. Non-admin users cannot configure all items.
To Next Page
Loading...
