Oki C813n User Manual

- 113 -
Moving or Transporting Your Printer
4
4. Maintenance
●● Moving or Transporting Your Printer
This section explains how to move or transport your printer.
Moving Your Printer
CAUTION
It may cause
injury.
● At least two people are needed to lift the printer
safely because it weighs about 37 Kg or 40 Kg.
1 Turn off your printer by pressing the
power switch.
Reference
● “Turning Off the Power” P.21
2 Unplug all the cables.
● AC cord and ground wire
● Ethernet or USB cable
3 Remove any paper from the paper trays.
4 Lift your printer and move it to a new
location.
Transporting Your Printer
CAUTION
It may cause
injury.
● At least two people are needed to lift the printer
safely because it weighs about 37 Kg or 40 Kg.
CAUTION
Possible to get
burned.
● The fuser unit is extremely hot. Do not touch
it.
Note
● The image drum (the green tube) is very delicate. Handle
it carefully.
● Do not expose the image drum to direct sunlight or very
bright interior light (approximately more than 1500 lux).
Even under the normal interior light, do not leave it for
more than 5 minutes.
1 Turn off your printer by pressing the
power switch.
Reference
● “Turning Off the Power” P.21
2 Unplug all the cables.
● AC cord and ground wire.
● Ethernet or USB cable.
3 Remove any paper from the paper trays.
4 Insert your nger into the recess on
the right side of the printer and pull the
front cover open lever (1) to open the
front cover (2) forward.
1
2
5 Press the output tray open button (3)
and open the output tray (4).
CAUTION
Possible to get
burned.
● The fuser unit is extremely hot. Do not touch
it.
3
4

Oki C813n Specifications

General

Brand	Oki
Model	C813n
Category	Printer
Language	English