- 41 -
Connecting to a Computer
1
1. Setup
Memo
● To change the name, enter a new name into
[Name:].
11 Click [Add].
12 When [Installable options] is
displayed, click [Continue].
13 Make sure that the machine is added
to [Printers] and [OKI C823 PCL] is
displayed for [Kind].
Note
● If [OKI C823 PCL] is not displayed for [Kind]
correctly, click [-], delete the machine from
[Printers], and then newly perform steps 8 to 12.
14 Click [Open Print Queue...].
15 Select [Print Test Page] from the
[Printers] menu.
When Adding Options
If options such as additional tray unit and/or
SD memory card kit have been installed, use
following procedures to change printer driver
settings.
For Windows PCL Driver
1
Click [Start] > [Devices and Printers].
2 Right-click the [OKI C833] icon and
select [Printer Properties]. (If you
have installed multiple printer drivers,
select [Printer Properties] >[OKI
C833 PCL6].)
3 Select the [Device Options] tab.
4 If using a network connection, select
[Get Printer Settings].
If using a USB connection,
enter the total number of trays
excluding the multipurpose tray in
[Installed Paper Trays]. For example,
when three option trays are installed,
enter “4” as the trays 1, 2, 3 and 4 are
available.
5 Click [OK].
To Next Page
Loading...
