Oki C813n - How to Print from the Tray

- 48 -
How to Print from the Tray
2
2. Printing Basic Operation
●● How to Print from the Tray
The following procedure explains how to load paper in tray 1 or tray 2/3/4 (option).
Memo
● This procedure explains to load paper in tray 1. The same procedure is applied to tray 2/3/4.
1 Pull out the paper tray (1).
1
2 Set the paper size dial (2) to match the
size of the paper to be loaded.
Set the dial to [A4 ] when loading A4 size
paper in horizontal orientation.
2
3 Slide the paper guide (3) and paper
stopper (4) to the size of paper to be
loaded.
3
4
Note
● When loading A6 size paper, move the paper stopper
(4) forward and remove it once, then install it on the
metal part.
4
4 Flex paper back and forth, and then fan
it. Straighten the edges of the paper
stack on a level surface.
5 Load paper with the print side face down
and press it from above.
Note
● Do not load paper exceeding the [ ] mark (5) of the
paper guide.
5
6 Secure the loaded paper with the paper
guide.
7 Check if a size of loaded paper matches
the setting of paper size dial.
8 Return the paper tray to the printer.
Memo
● If loading a paper that you cannot select the
size with a paper size dial options, set the dial to
[Other], and then set a paper size on the operator
panel.
9 Open a le you want to print, and print it.