- 66 -
Setting the Buzzer
2
2. Printing Basic Operation
●● Setting the Buzzer
You can set the buzzer volume when a paper jam occurs.
1 Press the scroll button or on the
operator panel.
2 Press the scroll button several times
to select [Admin Setup], and press the
<ENTER> button.
3 Enter the administrator password, using
the numeric (0-9) keys.
The factory default password is “999999”. Press
the <ENTER> button whenever inputting one
character.
4 Press the <ENTER> button.
5 Press the scroll button several times
to select [Buzzer Setup], and press the
<ENTER> button.
6 Press the scroll button several times
to select [Paper Jam Error Buzzer
Volume], and press the <ENTER>
button.
7 Press the scroll button several times
to select a volume level, and press the
<ENTER> button.
8 Press the <ON LINE> button to exit the
menu mode.
To Next Page
Loading...
Need help?
General
