- 32 -
Connecting to a Computer
1
1. Setup
First, Set the IP address of the printer.
1 Turn on the printer.
2 Press the <MENU> button on the
operator panel.
3 Press the scroll button to select
[Admin Setup], and press the
<ENTER> button.
4 Enter the administrator password, using
the numeric (0-9) keys.
The factory default password is “999999”. Press
<ENTER> button after each character you input.
5 Press the <ENTER> button.
6 Check that [Network Setup] is selected
and press the <ENTER> button.
7 Press the to select [IP Address Set],
and press the <ENTER> button.
8 If setting the IP address manually, press
the scroll button and select [Manual],
and press the <ENTER> button.
Proceed to the step 9.
If obtaining the IP address automatically, check
that [Auto] is selected, and press the <ENTER>
button.
Proceed to the step 15.
9 Press the <BACK> button until
[Network Setup] is displayed.
Press the scroll button to select
[IPv4 Address], and press the
<ENTER> button.