- 50 -
Connecting to a Computer
1
1. Setup
Installing a Printer Driver
(For Mac OS X)
Note
● Disable the anti-virus software before starting this
procedure.
For Mac OS X 10.5 to 10.7
1 Ensure that your printer and the
computer are turned on and connected.
Reference
● “Connecting a USB Cable” P.48
2 Insert “Software DVD-ROM” into the
computer.
3 Double-click the [OKI] icon on the
desktop.
4 Double-click [Driver] folder >
[Printers] folder [Installer for Mac
OSX].
5 Enter the administrator’s password, and
then click [OK].
Follow the instructions displayed on the screen to
complete the installation.
6 From the Apple menu, select [System
Preferences].
7 Click [Print & Scan] ([Print & Fax] for
Mac OS X 10.5 and 10.6).
8 Click [+].
Note
● If the printer is already shown in [Printers], select
your printer, and click on [-] to delete. After this,
click [+].
9 For Mac OS X 10.7, select [Add Other
Printer or Scanner].
10 Select the name of the printer where
[Kind] is [USB], and then check that
[OKI C822(PCL)] is displayed in
[Print Using].
11 Click [Add].
12 Check that the name of your printer
is displayed in [Printers] and
[OKI C822(PCL)] is displayed in
[Kind].
Note
● If [OKI C822(PCL)] is not correctly displayed, click
[-] to remove your printer from [Printers] and then
redo the procedure from steps 8 to 11.
13 Close [Print & Scan] ([Print & Fax] for
Mac OS X 10.5 and 10.6).
14 Remove “Software DVD-ROM” from the
computer.
Finish by test printing from a computer.
1 Start up [TextEdit].
2 Open an appropriate le.
3 Start printing.
The installation is complete.
To Next Page
Loading...
