Oki C822n - Page 51

- 51 -
Connecting to a Computer
1
1. Setup
 For Mac OS X 10.3.9 to 10.4.11
Memo
● The procedure below uses Mac OS X 10.4.11 as an
example. Depending on your OS, the description may be
different.
1 Ensure that your printer and the
computer are turned on and connected.
Reference
● “Connecting a USB Cable” P.48
2 Insert “Software DVD-ROM”.
3 Double-click the [OKI] icon on the
desktop.
4 Double-click [Driver] folder > [Printer]
folder > [Installer for Mac OSX].
5 Enter the administrator’s password, and
then click [OK].
Follow the instructions displayed on the screen to
complete the installation.
6 From the [Go] menu, select [Utilities],
and then double-click [Printer Setup
Utility].
Note
● If [Printer Setup Utility] is already running, close it
and open it again.
7 Click [Add].
If the [You have no printers available] dialog
box appears, click [Add].
Note
● If the name of the printer is already displayed, select
it and click [Delete], and then click [Add].
8 Select the name of the printer where
[Connection] is [USB], and then check
that [OKI C822(PCL)] is displayed in
[Print Using].
For Mac OS X 10.3.9, set as follows.
a Select [USB] from the pop-up menu.
b Select the printer from the list.
c Select [Oki] from [Printer Model]
and then select [OKI C822(PCL)]
from the driver list.
9 Click [Add].
10 Check that the name of your printer is
displayed in [Printer List], and then
close the window.
11 Remove “Software DVD-ROM” from the
computer.
 Finish by test printing from a computer.
1 Start up [TextEdit].
2 Open an appropriate le.
3 Start printing.
The installation is complete.