Oki C834 User Manual

- 22 -
2. Setup
1
Insert your finger into the recess on the right side of the printer and pull the
front cover open lever (1) to open the front cover (2) forward.
• Open the front cover gently. If opening rapidly, an MP tray may open.
2
Press the open button (3) and open the output tray (4).
3
Prepare flat surface covered with sheets of newspaper, etc. to remove
protective sheets from the image drums set in the printer.
4
Take the image drum "K: Black" set forward with the toner cartridge attached
and put it on the surface prepared in step 3.
• Image drums are not locked on the printer. It can be removed by lifting it up.
• The starter toner cartridges are shipped with the image drums attached. Please do not remove starter toner
cartridges from the image drums.
5
Remove the protective sheet (5) from the image drum.
(1) Remove a tape (6) stuck on a protective sheet (5) and open it.
Installing Consumables

Oki C834 Specifications

General

Print Technology	LED
Maximum Paper Size	A3
Processor	800 MHz
Operating Systems Supported	Windows, Mac OS, Linux
Dimensions	449 x 552 x 360 mm
Weight	37 kg
Print Resolution	1200 x 600 dpi
Duplex Printing	Yes
Memory	1 GB
Connectivity	USB, Ethernet
Interface	USB, Ethernet
Media Size	A6 to A3