Oki C834 - Setting the Time before Entering the Auto Power off Mode

- 72 -
5. Energy Saving Function
Setting the Time Before Entering the Auto Power Off
Mode
• When a printer is in the power saving mode, press the «POWER SAVE» button to restore from the mode.
• Check if the message “Ready To Print” appears. If the message is not displayed, press the «ON LINE» button.
1
Press the «Fn» key on the operator panel.
2
Enter «2» «0» «2» using the numeric keypad and then press the «ENTER»
button.
3
Press the scroll button or to specify the time and then press the
«ENTER» button.
• Available values are as follows. The factory default setting is 4 hours.
1 hour, 2 hours, 3 hours, 4 hours, 8 hours, 12 hours, 18 hours, 24 hours
4
Press the «ON LINE» button.