Oki C834 User Manual

- 43 -
3. Connecting to a Computer
Connecting a LAN Cable
Connect the printer to a computer using wired LAN network.
Before installing the printer driver, connect the printer to a network using a LAN cable.
1
Prepare a LAN cable (1) and hub (2).
A LAN cable is not supplied. A LAN cable (category 5e or higher, twist pair, strait) is
required.
2
Turn off the machine.
3
Insert one end of the LAN cable (1) into the network interface connector.
4
Insert the other end of the LAN (1) cable into the hub (2).
Next, set the Network information such as IP addresses of the printer.
5
Turn on the printer.
6
Press the scroll button several times to select [Admin Setup], and press
the «ENTER» button.

Oki C834 Specifications

General

Print Technology	LED
Maximum Paper Size	A3
Processor	800 MHz
Operating Systems Supported	Windows, Mac OS, Linux
Dimensions	449 x 552 x 360 mm
Weight	37 kg
Print Resolution	1200 x 600 dpi
Duplex Printing	Yes
Memory	1 GB
Connectivity	USB, Ethernet
Interface	USB, Ethernet
Media Size	A6 to A3