Oki C834 User Manual

- 42 -
3. Connecting to a Computer
Connecting a USB Cable
Connect the printer to a computer using a USB cable.
1
Prepare a USB cable.
A USB cable is not supplied. A USB2.0 cable is required.
• USB3.0 is not supported.
• If you want to connect in USB 2.0 Hi-Speed mode, use a Hi-Speed USB 2.0 USB cable.
2
Turn off the machine.
3
Insert one end of the USB cable into the USB interface connector on the
machine.
• Do not insert the USB cable into the network interface connector. It may cause a malfunction.
4
Insert one end of the USB cable into the USB interface connector on the
machine.
• For Windows, do not insert the other end of the USB cable into the computer until the instruction is displayed
on the screen when the driver installation is in progress.
Go to the procedure to "Installing a Printer Driver to a Computer".

Oki C834 Specifications

General

Print Technology	LED
Maximum Paper Size	A3
Processor	800 MHz
Operating Systems Supported	Windows, Mac OS, Linux
Dimensions	449 x 552 x 360 mm
Weight	37 kg
Print Resolution	1200 x 600 dpi
Duplex Printing	Yes
Memory	1 GB
Connectivity	USB, Ethernet
Interface	USB, Ethernet
Media Size	A6 to A3