1
1-54 Installing User Software on a Windows Computer
Modifying the configuration
Edit the configuration whenever there is any change to your Fiery server or network,
such as a server name or IP address. If you change Fiery Setup information, do so
before reconfiguring the connection.
TO MODIFY THE CONFIGURATION
1. Start Command WorkStation.
The Login Server window appears.
2. Select the Fiery server for which you want to modify the configuration,
and click Remove.
The Available Servers dialog box appears.
3. To add the modified Fiery server, follows steps 3 through 6 of the procedure,
“To configure the connection for Command WorkStation” on page 1-51.
To modify the connection to the Fiery, you must remove the server from the Login
Server list and follow the procedure for configuring the connection.
To Next Page
Loading...
Need help?
General
