1
1-5 Setting up PostScript or PCL printing with Windows 98/Me
Configuring installed options
After you have completed the printer driver installation, you may configure the driver
for the optional hardware installed on the C9800. This allows the driver to take
advantage of these options. You can configure the options manually or, for TCP/IP
network connections, you can use the Two-Way Communication feature to configure
the options automatically.
Configuring installed options manually
The following procedure describes how to manually configure the Fiery for the options
installed on the printer.
TO CONFIGURE OPTIONS MANUALLY FOR WINDOWS 98/ME
1. Click Start, choose Settings, and then choose Printers.
2. Right-click the appropriate printer icon and choose Properties from the context menu.
3. Click the Installable Options (PS) or Device Options (PCL) tab.
4. Select an installed option from the Available Options list.
5. In the PS driver click Add to move the option to the Installed Options list. This is not
necessary in the PCL driver.
6. Click Apply, and then click OK.
PS PCL
To Next Page
Loading...
Need help?
General
