2
2-4 Installing User Software on a Mac OS Computer
Configuring a connection for ColorWise Pro Tools
The first time you use ColorWise Pro Tools, you are prompted to configure a
connection to the C9800.
NOTE: ColorWise Pro Tools are supported only over TCP/IP networks.
BEFORE YOU BEGIN
• Print the Configuration page from the Printer Control Panel and note the IP address of
the C9800.
Press the MENU keys until the Print Pages menu is displayed, then press ENTER to
select this menu.
Press the MENU keys until CONFIGURATION is displayed, then press ENTER to print
these pages.
The printer’s IP address is shown under Network Setup on the first configuration page.
TO CONFIGURE A CONNECTION FOR COLORWISE PRO TOOLS
1. Start the utility by double-clicking its icon.
The Choose Printer Device dialog box appears.
To Next Page
Loading...
Need help?
General
