C9800 User’s Guide - 24
B
OOKLET
PRINTING
Booklet printing allows printing of multipage documents with
their pages ordered and arranged so that final printed output can
be folded into a booklet. Typically, letter (or tabloid) pages would
be reduced to half-letter (or letter) and printed side by side on
both sides of letter (or tabloid) paper, so that the paper can be
folded into a booklet.
Since this feature prints on both sides of the page, it requires a
duplex unit to be installed in the printer, and 256MB of additional
memory (512MB in total).
Notes
1. To find out how much memory is currently installed, print a
Configuration Page from the printer control panel. See the
C9800 User’s Guide.
2. A few applications do not support booklet printing, but most
do.
Note that the number of pages in a booklet is always a multiple
of four, since two pages are printed on each side of each sheet of
paper. If your document is not a multiple of four pages long, the
last one, two or three pages in your folded booklet will be blank.
A
CTIVATING
B
OOKLET
P
RINTING
1. On the driver’s [Setup] tab, choose [Booklet] from the
[Finishing Mode] drop-down list.
To Next Page
Loading...
Need help?
General
