C9800 User’s Guide - 30
C
USTOM
PAGE
SIZE
This feature enables printing on non-standard sized print media.
The multipurpose tray is used for feeding non-standard media
sizes. Print media width can be from approximately 51mm to
328mm, and its length can be from 128mm to 1200mm. Actual
limits vary slightly depending on which printer driver you use and
your computer’s operating system.
Some software applications may not produce the desired results
with non-standard print media sizes, and some experimentation
may be required to obtain the results you want.
Notes
If you are using heavy media, transparencies, envelopes or labels,
use the face up (straight through) paper feed path.
For face up printing (straight-through path), make sure the rear
exit is open and the paper support is extended.
> Paper is stacked in reverse order.
> Tray capacity is about 100 sheets. (Actual capacity
depends on paper weight.)
H
OW
TO
CREATE
,
EDIT
,
AND
DELETE
A
CUSTOM
PAGE
SIZE
1. On the driver’s [Setup] tab, click the [Paper Feed
Options...] button.
2. In the Paper Feed Options window, click [Custom Size...].
If you have previously saved any custom sizes they will be
listed in the Custom Size window.
3. To create a new custom size:
a. Enter the desired dimensions in the Width and Length
boxes.
b. Enter a name for the new size in the Name box, and
click [Add>>] to save it in the list.
To Next Page
Loading...
Need help?
General
