- 177 -
9. Troubleshooting
7
If paper jams in the fuser unit, press the jam release lever (c) on the fuser unit
and slowly pull the jammed paper toward you.
8
Tilt back the lock levers (d) on the both sides of the fuser unit toward you.
9
Hold the fuser unit handle and lift the fuser unit out of the machine.
While removing the fuser unit, be careful not to hit it to the LED head.
10
Turn the lock levers (e) on the both sides of the belt unit toward you and
remove the belt unit by holding the lock levers.
To Next Page
Loading...
