Oki MC860 - How to Set up When the User Name Is Managed by the Domain


6-3 How to set up when the user name is managed by the domain
When [Check the DNS setting] or [Check the server setting] is displayed on the LCD of MC860, the
network may be managed by the domain.
Check with the administrator of the network, and if the network is managed by the domain, MC860 is set
up wit the following procedure.
In this example, Windows XP is used for the description.
Check the domain name.
1) Open [Start]- [Control Panel].
Set up MC860.
Set up with the procedure of “3-3 Setup for
Scan To CIFS in MC860” (page 22).
In this
case, the value to be entered in the step
❿
on page 23 is as follows
mc860 + @ + domain.co.jp
2) Open [Systems](For the category display,
select [Performance and Maintenance] –
[System]).
3) Select the [Computer Name] tab to click
[Change].
4) Check the domain name.
In the following figure, “domain.co.jp” is the
domain name.