Oki MC860 Easy Setup Guide


2 Scan To Mail
Scan To Mail provides a function to send an email with images scanned by MC860 to a specified email address.
2-1 Check information required for Scan To Mail.
If a network administrator specifies mail server account, password and email address (sender) for MC860,
enter them in the setup information form.
2-1-1 Check [SMTP Server], and [POP3 Server], or the like to fill in the Setup Information
Form.
This task is performed by the computer which you want to send Scan To Mail from MC 860.
In this example, Outlook Express on Windows XP is used.
If you are using other email software, refer to the manual of that email software.
Click the [Start] button to select [Email Outlook
Express].
Select [Tools] - [Accounts].
Select an item whose [Type] is [Mail (default)],
and click [Properties].
Enter [Name] and [E-mail address] on the
[General] tab in "E-11" and "E-12" of the Setup
Information Form.
Fill in "E-11".
Fill in "E-12".
Note
:
The email address that is entered here is used
to send email as described on page 12.
Click the [Servers] tab to fill in each column on
the Setup Information Form according to the
following graphic.
Fill in "E-2".
Fill in "E-3".
If this box is checked, enter "SMTP" in "E-6".
If it is not checked, enter "POP" in "E-6".
Fill in "E-9"
Enter the password
in "E-10".

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb