Oki MC860 - GETTING STARTED; RELEASING THE SCANNER LOCKS


3-1-2 Determine a user name and password to log into a computer you would like to
send data to.
3-1-3 Determine a profile name when registering settings in MC860, and fill in "C-4" on
the Setup Information Form.
3-1-4 Determine a folder name of a computer where sent data is saved, and fill in "C-5"
on the Setup Information Form.
3-1-5 Determine a name for a scanned data file, and fill in "C-6" on the Setup Information
Form.
3-2 Set up a computer to which data is sent by Scan To CIFS.
Register MC 860 in the computer as a user, and set up a shared folder.
For Windows XP users, proceed to page 18.
For Windows 2000 users, proceed to page 20.
For Windows Vista
Select [Start] – [Control Panel].
Click [Add or remove user accounts].
Click [Create a new account].
Enter the value of “C-2” on the Setup Information
Form.
Check that [Standard User] is selected, and then,
click [Create Account].
Click the icon of the user name entered in Step
Click [Create a password].
Enter the
value of “C-2”
.
Conrm the
"Standard
User".