Enter the value of “C-3” in [New password]
and [Confirmation for new password], and
click [Create password].
Enter the value
of “C-3”.
Close [Control Panel].
Next, set up a folder to save data scanned by
MC860 in the computer.
To save data scanned by MC 860 in the
computer, create a folder with the name of “C-5”
of the Setup Information Form.
Right click the folder created in the step , and
open [Properties].
Click [Share] on the [Sharing] tab
Select the user added in the step , and click
[Add].
Select the added user and click [Share].
Click [Done].
Click [Advanced Sharing] on the [Sharing] tab.
To Next Page
Loading...
