ML620/ML621 User’s Guide 33
Paper Type Table
PAPER
TYPE
LEVER POSITION
1 2 3 4 5 6 7 8 9 10
Cut Sheet Paper
52-81 g/m
2
Χ
81-128 g/m
2
Χ
128-156 g/m
2
Χ
Post Card Χ
Envelope Χ
Continuous Paper
52-81 g/m
2
Χ
81-128 g/m
2
Χ
Carbon Paper or Pressure-Sensitive Paper (40 g/m
2
)
2-part Χ
3-part Χ
4-part Χ
5-part Χ
6-part Χ
7-part Χ
Set the Paper Thickness lever for overall thickness as
show below:
Overall Paper
Thickness
Lever
Position
0.06 - 0.10 mm 1
0.11 - 0.15 mm 2
0.16 - 0.20 mm 3
0.21 - 0.25 mm 4
0.26 - 0.30 mm 5
0.31 - 0.35 mm 6
0.36 - 0.40 mm 7
0.41 - 0.45 mm 8
0.46 - 0.50 mm 9
0.51 - 0.53 mm 10
NOTES:
If the lever position does not suit the paper
thickness, paper feeding and printing may not
work properly.
To avoid possible pin breakage/ribbon snagging, do
not print on bank books.
When lever positions 5‑10 are selected, printing
quality for carbon paper may decline.
To Next Page
Loading...
