ML620/ML621 User’s Guide 43
Menu Settings Table
For a complete explanation of each menu item, see “Explanations of Menu Items” later in this chapter.
The table below shows the items which may appear in the menu. Settings which are engaged at the factory
(defaults) are set in bold italic. Some groups or entries will only appear when a specic emulation is engaged,
as noted.
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
Printer
Control
Emulation Mode Selects the printer command set
(emulation) you want to engage.
IBM PPR, Epson FX, ML
Font Print Mode Choose the quality and typeface of
printing. Switch to NLQ Courier or
NLQ Gothic for Near Letter Quality
printing. If you are printing draft-
type documents, select DRAFT,
then select either HSD or SSD
under DRAFT Mode. Both of these
Items are in the Font Group.
Draft, NLQ Courier, NLQ Gothic, NLQ
OCR-B, HSD, SSD
Draft Mode Applies only when the Print Mode
is set to DRAFT. Selects the draft
mode to be used: HSD (High
Speed Draft) or SSD (Super Speed
Draft).
HSD, SSD
Pitch Choose the character width, in
characters per inch (cpi).
10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20
cpi
To Next Page
Loading...
