ML620/ML621 User’s Guide 81
Responding to Alarm Conditions
Use the following table for guidance on how to
respond to alarm conditions.
INDICATOR
ALARM MEANINGS AND ACTIONS
SEL ALARM
OFF ON Paper has run out. Add paper and
press the SEL key.
OFF Flashing The Paper Type lever is set
incorrectly for the type of paper in
use. Press the SEL key and move
the Paper Type lever to the correct
setting.
OFF Flashing Problem with cut sheet feeding.
Remove the cut sheet.
Flashing ON Print data is received but printing
does not start because no paper is
being fed. Insert paper.
Flashing Flashing Printing cannot be resumed at this
stage. Turn the power OFF, verify
that the carriage moves properly,
then turn the power ON again.
If the indicator lights continue to
ash, contact your dealer.
To Next Page
Loading...
