Oki ML620 - Page 73

ML620/ML621 User’s Guide 73
Raise each Pin Tractor cover and remove
the continuous forms from the Pin Tractors.
Rotate the platen knob and remove the forms
from the front of the printer.
If a form fragment remains inside the printer,
place two or three forms in a stack on the Pin
Tractors and turn the platen knob to push the
fragment out of the printer.
When the paper jams are cleared, lower
the top Paper Tray and slide it towards the
front of the printer until the marks align.
5.
6.
7.
8.
Close the access cover and turn the printer back
on.
9.