Management of this machine
- 199 -
Changing settings of Admin Setup
This section explains the procedure of changing settings of this machine as an administrator.
1
Check that "Ready To Print" appears on the display.
If the machine is in the power save mode, press «POWER SAVE» to restore.
2
Press the scroll button ▼ on the operator panel several times to select [Admin Setup], and
press «OK».
3
Input the admin password using the numeric keypad, and press «OK».
4
Press ▲ or ▼ to select the menu for which you want to change the settings, and press «OK».
5
Press ▲ or ▼ to change the settings.
6
Press «OK».
7
Press «ON LINE» to return to the standby screen.
To Next Page
Loading...
