Basic operations
- 71 -
Turning the power on/off
Turning the power on
1
Press and hold the power switch for approx. one second.
When the power is on, the LED lamp of the power switch will light on.
When this machine gets ready, "Ready To Print" will appear on the display.
Turning the power off
1
Press and hold the power switch for approx. 1 second.
"Shutting down. Please wait. The power will turn off automatically" will appear on the display, and the
LED lamp of the power switch will flash at intervals of approx. 1 second.
Wait a moment, and this machine will be powered off automatically, and the LED lamp of the power
switch will turn off.
If you press and hold the power switch for approx. 1 second while this machine is in the power save mode, the
power will turn off without displaying anything.
Please wait. This may take about 5 minutes to turn off the power.
Press and hold the power switch for more than 5 seconds to turn off the power by force. Use only if a problem
has occurred. For troubles with this machine, refer to “Troubleshooting for the machine(P.374)".
To Next Page
Loading...
