Connecting to the PC after preparing the device
- 34 -
Loading paper in the tray
This section describes the procedure assuming that A4-sized plain paper is loaded in Tray 1. When other
paper is loaded, see "
Loading paper(P.72)".
1
Pull out the paper cassette.
2
Slide the paper guide and the blue part of the paper stopper to fit the size of the paper to be
loaded.
3
Shuffle the paper well. Straighten the edges of the paper horizontally.
4
Load the paper with the printing side down, and press it down from top.
Do not exceed the ▽ mark on the paper guide when loading paper.
To Next Page
Loading...
