Oki N36800B - Changing Gamma Values and Hues

Useful software
- 260 -
12 Click [Print Test] to check whether the adjusted color is closer to the color you want, and then
click [Next].
If you want to further change the color or change other colors, repeat Steps 8 to 11.
13 Input a name for the setting, and click [Save].
14 Click [OK].
15 Click [Finish].
For macOS
1 Start the Color Correct Utility.
2 Select the device you want to adjust.
3 Click [Next].
4 Click [Office Palette Tuning].
5 Select the name of the setting, and click [Print Sample].
6 Click [Next].
7 Click [Print Test].
8 Compare the color palette on the screen with the colors of the printed color sample for
adjustment.
The color marked with an x cannot be adjusted.
9 Click the color you want to adjust.
10 Check the adjustable range of X and Y from the pull-down menu.
The adjustable value varies with the specific color.
11 Check the printed color samples, select the most suitable color within the adjustable range, and
then check the X and Y values.
12 Select the values you checked in Step 11, and click [OK].
13 Click [Print Test] to check whether the adjusted color is closer to what you want.
If you want to further change the color or change other colors, repeat Steps 9 to 13.
14 Input a name and click [Save].
15 Select [Printers & Scanners] from [System Preferences], delete the registered adjusted device,
and then re-register.
Changing gamma values and hues
The tone can be adjusted by adjusting the gamma value, and the output color can be adjusted by adjusting
the hue.